DIGI kit, engine monitoring systèmeThe digi is a motor information system that can be used as a stand-alone instrument or in conjunction
with Nesis, Aetos or Emsis instruments. DIGI Features DAQU module DAQU FEATURES Various forms of data display Examples of data display arrangements Pipistrel Alpha Trainer layout Different displays are customizable from the Kanardia software available for Windows, Mac or Linux. 117 x 71 x 17 (50 with connector) mm 30% to 90% non-condensing Diagonal: 4.3" (4.3")
Resolution: 480 x 272
Brightness: 1000 cd/m2 Diagonal: 4.3" (4.3")
Resolution: 480 x 272
Brightness: 1000 cd/m2 CAN bus, 29 Bits, 500 kbis
Kanardia protocol The DAQU is a data acquisition unit specially designed to monitor engine parameters. It provides information on Nesis, Emsis, Aetos and Digi devices. The Mini DAQU also supports the Rotax iS engine. The DAQU has 21 analog and three digital channels, which can be used to support the following functions:
- Engine speed
- Rotor speed
- EGT
- CHT
- Inlet pressure (special connector)
- Fuel flow (1 to 2 sensors)
- Oil pressure
- Oil temperature
- Coolant temperature
- Gearbox temperature
- Air box temperature
- Fuel level (two tanks)
- fuel pressure
- Tenssion
- Retarder current
- Battery current
- Pneumatic or hydraulic pressure
- Carburetor temperature
CAN bus connection
The DAQU reads various engine sensors, processes the readings and transmits them to other units/instruments. Intake manifold sensor
The DAQU has a built-in sensor used to measure intake manifold pressure. Analog channels A
Analog channels with -2.5 V to +2.5 V input, generally used to connect resistive sensors and thermocouples. Analog channels B, D, E
Analog channels with 0 to +5 V input, used to read active sensors. Analog channel C
Analog channel with 0 to +30 V input, used to read higher voltage levels. Digital channels Z, Y
Digital channels used to measure the time between pulses, such as engine or rotor speed signals or fuel flow. Rotax 912 iS engine - mini DAQU
When only limited additional channels are required, in addition to the information already provided by the Rotax 912 iS ECU, you may wish to consider using the Mini DAQU designed for this purpose. DAQU
| Weight : |
135 grams |
| Dimensions : |
125 x 80 x 20 mm |
| Power supply : |
7 - 32 V |
| Current : |
60 mA at 12 V (without probes)
100 mA at 12 V (with probes)
|
| Operating temperature : |
-30°C to +85°C |
| Humidity : |
30% to 90% non-condensing |
| Analog channels : |
22 (15xA, 2xB, 1xC, 2xD et 2xE) |
| Digital channels : |
3 (1xZ and 2xY) |
| Processor : |
Cortex M3, 60 MHz |
| Communication : |
CAN bus, Kanardia protocol |
| Connector : |
Binder 99 0414 00 05 |
DAQU Mini
| Weight : |
90 grams |
| Dimensions : |
76 x 44 x 30 mm |
| Power supply : |
7 - 32 V |
| Current : |
100 mA at 12 V (without probes)
200 mA at 12 V (with probes)
|
| Operating temperature : |
-30°C to +85°C |
| Humidity : |
30% to 90% non-condensing |
| Analog channels : |
5 (1xC, 2xD et 2xE) |
| Digital channels : |
1xY |
| Processor : |
Cortex M3, 60 MHz |
| Communication : |
CAN bus, Kanardia protocol |
| Engine ECU connector : |
D-SUB 9 female |
| Kanardia CAN connector |
D-SUB 9 male |
|
