Err

Catalog
Search   Back to Catalog

Kanardia NESIS III Kit

(Code: 61260-01)
Taille :
5,028.00 €
Available at Supplier
Request Info
Kanardia NESIS
Kanardia

Nesis, the complete navigation, flight and engine system for ultralight aircraft, autogyros and helicopters. The Nesis avionics family is a self-contained, state-of-the-art and optimized EFIS instrument.

Kanardia takes great care to make its instruments as light and thin as possible. Nesis weighs only 745 g for a dimension of 190 x 125 x 40 mm.
Kanardia épaisseur
Kanardia tactile
Large 7" sunlight readable touch screen with high contrast.

Different display possibilities :

Kanardia classique
Flight information display which is the main concern of the pilot. All round gauges are fully configurable and can also display other information.
Kanardia moteur
The engine monitor screen displays various engine and fuel related parameters. Some instruments and parameters are configurable and can be adjusted to individual needs.
Kanardia Moderne
The modern flight information display consists of a background image and an overlay.
Kanardia navigation
Large moving map with some additional information. The large HSI scale and the vertical airspace situation are painted on the map.
Kanardia Audio
Passive Cooling
 
Low power consumption even at high brightness. This allows passive cooling without fans.
Kanardia GPS
Audio Output
 
Nesis emits many warnings. You can hear them by connecting Nesis to your audio panel with a standard 3.5 mm jack.
Kanardia Refroidissement
GPS / AHRS / Integrated Pitot
 
Nesis has an integrated global positioning system, altitude and heading reference system, pressure measurement system and much more.
Kanardia Double
Rotax IS Starter
 
Choke level of the Rotax IS engine.
Kanardia ADS-B
Double Kit
 
Dual display, dual your options. The secondary Nesis is equivalent and can be used by a co-pilot or simply as an extension, as flight information system (EFIS), engine information system (EMS) or both.
Kanardia Starter
ADS-B & Flarm
 
By connecting ADS-B & Flarm, Nesis will display the traffic on the navigation screen.
Engine cooling function
Multi-Pilot/instructor support
Logbook
Maintenance
Kanardia option
This is a special option for when you want to cool the engine by idling it before turning it off.
Kanardia Pilote
You can add, edit, remove multiple pilots and/or instructors.
Kanardia Journal
Nesis automatically keeps a log of flights and stores them in a logbook.
Kanardia Entretien
This option allows you to set a maintenance warning.

Available options :

Video input
Control Handle
Ready for autopilot
Kanardia Vidéo
Kanardia Poignée
Kanardia Pilote Automatique
You can connect any composite video and see the video
By connecting the JOYU control handle and the BOXI, you can control the pitch and roll, the electric trim and the radio transmission.
With two servos connected, you can use Nesis as your primary device to control your autopilot.

Technical specifications :

Weight:
745 grammes
Size:
190 x 125 x 40 mm
Operational Voltage:
8 to 25 Volts
Power Consumption:
690 mA
Operating Temperature:
-30°C to +85°C
QNH Range:
590 to 1080 hPa (17.42 à 31.89 inHg
Airspeed Sensor:
12 bit, 0 to 69 hPa, 381 Km/h, 205 kt
Résolution < 0.1 km/h
Barometric Sensor:
24 bit, 10 à 1200 hPa,  20 cm résolution
Acceleration:
16 bit, 3D, Dynamic range 0 to 16 g
Typical resolution 0.12 mg
Angular rate:
16 bit, 3D, 250°/s resolution 0.009°/s
GPS:
10 Hz, 66 Channel, sensitivity -165 dBm
OAT:
12 bits, range -55 to 125◦C, 0,5◦C accuracy
Communication:
CAN Bus, 29 bit header, 500 kbit, Kanardia protocol 
Input : ADS-B & Flarm, RS 232, video in,
OAT, USB, service port ;
Output : GPS, audio out
Sensor processor:
32 bit, ARM Cortex M3, 100 Mhz
Display processor:
DM 3730, 32 bit, ARM Cortex A8, 800 Mhz
Display:
800 x 600 pix, diagonal 7", 16 bits,
Full colour, super bright
Touchscreen:
Projected capacity, optically bonded multi touch
Video hardware acc.:
Power VR SDX 540
Memory:
512 RAM
Start-up time:
< 10 s