 Description Technical specifications overall plan
Complete kit: 2 devices for sides and 1 for fuselage or fin
Navigation / position / flashing lights
The Hemera product contains three lighting devices:
- a red navigation light with integrated position and flashing light functions
- a green navigation light with integrated position and flashing light functions
- a white flashing light
The Hemera product offers you a complete system that can be installed on wingtips, side fairings, fuselage or fin, as required.
It can be installed on pendular, multi-axis, gyrocopter and helicopter aircraft.
Hemera integrates synchronized and dissociable functions: navigation lights / position lights and strobe lights for full in-flight visibility.
The power of the strobe function illuminates the sky with 20,000 lumens, making your aircraft (ULM / LSA / CNRA / CNSK) the most visible in the sky.
Its optimized electronic design delivers light output unrivalled on the market, with low constant power consumption and low weight.
Simple wiring ensures quick, easy installation.
Last but not least, its interchangeable glass bowl makes replacement quick and easy.
Raylight's technology offers superior power to Xenon technologies, while retaining the advantages of LEDs (weight, power consumption, integration) and eliminating their radio interference.
| Lumens |
13 300 x 3 |
| Candelas |
1 267 x 3 |
| Number of white LEDs |
20 x 3 |
| Number of RWG LEDs - Position lights |
7 x 2 |
| Constant consumption - A |
0,4 - 1,2 |
| Voltage - VDC |
10 - 15 |
| Electrical protection |
Overvoltage and reverse polarity - LEDs disconnected - Short circuit |
| Frequency - synchronized flashes per min |
55 - 65 |
| Lens type |
UV-resistant polycarbonate (ULV 0) |
| Total weight (+/-5) - G |
570 gr |
| Weight of luminaires - G |
40 gr |
| Generator weight (+/-5) - G |
450 gr |
| Fixations |
Supplied |
| Fasteners - IN |
4 |
| Fasteners - MM |
101,5 |
| Generator electrical connection |
standard 2-wire quick-connect terminal blocks |
| Tool-free - no length limit |
Cross-section 0.25 to 0.75 mm² (0.5 mm² recommended) AWG 19 to 23 |
| Strobe dimensions - L X L X H - IN |
4,72 x 1,77 x 1,38 |
| Strobe dimensions - L X L X H - MM |
120 x 45 x 35 |
Generator dimensions - L X W X H - IN
|
4,2 x 2,6 x 2,3 |
| Generator dimensions - L X L X H - MM |
107 - 67 - 59 |
| Between generator axes - L X W - IN |
3,8 x 2 |
| Between generator axes - L X L MM |
96 x 50 |
|
