| (Code: 60153-C) Connector for Flap controller - Sold without pine
|
| (Code: 60153-57) The electronic flap controller (EFC) is a device which allows to command ant to control the flap position easily and on an automatic way.
|
|
(Code: 60412-R) Handle grip 5 red buttons Other type of handle, different fabrication and made in Europe 25 mm handle + adapter for a 20 mm handle
|
| (Code: 60404-G3) The Ray Allen G303 handle includes a joystick switch at the front (2 positions + neutral) and a push switch in the back, to mount on a 25 mm tube. Provided with tube reduction spacer. Weight: 110g
|
| (Code: 60218) Full depth trim kit including the servomotor with the rod, position indicator and the bascule button, and its feedback. Also exists for the direction and the ailerons.
|
|
(Code: 60238) LED indicator for trim motor or Ray Allen trim-pot, can be installed horizontally or vertically Indicator dimension: 44 x 19 x 28mm
|
| (Code: 60160-100) Ram with trim-pot, provides with a 100 mm stroke and a limit stop. Characteristics: TYPE: LAS3-1 Maximum strength: 120 DaN Abutment strength max: 80 Dan Max speed: 8/12 sec Stroke: 50 mm Tension: 12 volts Max power: 6 amp End of travel integrated Trim-pot: 21 Ohm/ mm Retracted length: 246 mm Protection: IP 54
|
| (Code: 60160-150) Ram with trim-pot, provides with a 150 mm stroke and a limit stop. Characteristics: TYPE: LAS3-1 Maximum strength: 120 DaN Abutment strength max: 80 Dan Max speed: 8/12 sec Stroke: 50 mm Tension: 12 volts Max power: 6 amp End of travel integrated Trim-pot: 21 Ohm/ mm Retracted length: 296 mm Protection: IP 54
|
|
(Code: 60160-050) Ram with trim-pot, provides with a 50 mm stroke and a limit stop. Characteristics: TYPE: LAS3-1 Maximum strength: 120 DaN Abutment strength max: 80 Dan Max speed: 8/12 sec Stroke: 50 mm Tension: 12 volts Max power: 6 amp End of travel integrated Trim-pot: 21 Ohm/ mm Retracted length: 196 mm Protection: IP 54
|
| (Code: 60160-P) Linear position trim-pot which allows you to control 60153 electronic flaps with jacks (which dont provide trim-pot). Only available on a 100 mm stock.
|
| (Code: 60234) Ray Allen position trim-pot Combines with the position indicator for commands which dont have 3 wires Ray Allen motor 0 to 5 kg Dimension: 69 x 19 x 13 mm Stroke: 30 mn
|
|
| (Code: 60219) Ray allen switch rocker
|
| |
| (Code: 60404-G1) The Ray Allen G101 handle grip owns a button, so that it could be settled on a 25 mm tube. Provided with tube reduction spacer. Weight: 105g Handles height: 120 mm
|
| (Code: 60404-G5) The Ray Allen G205 handle grip owns 5 buttons, to mount on a 25 mm tube. Provided with tube reduction spacer. Weight: 105g
|
|
(Code: 60209) LED indicator of FLAP, TRIM and flaps movements. Made to be used with a potentiometer from 0 to 5kohm. The device is delivered with two crews and nuts to mount on the panel. Dimension: 16.7 mm * 29.8 mm. Weight: 26g
|
| (Code: 60243) Ray Allen command trim rod
|
| |
