(Code: 70499-00) Fuel pressure regulator with female output 1/8’ for carburetor motor. Sold without tips
|
| (Code: 70499-01) Fuel pressure regulator for carburetor motor with 6 and 8 mm male output for interior 6 or 8 mm fuel pipe.
|
| (Code: 70514-01) Decanter filter with output purge, female, 1/8’, allow to mount a tip for 6, 8 or 10 mm interior diam fuel pipe. Full height: 124.30 mm, width: 63.50 mm, jar height: 60 mm, jar diam: 55 mm, tip height: 41 mm, 2 6 mm holes with center-to-center distance of 31 mm
|
|
(Code: 70514-F01) Stainless filter for decanter filter. Height : 50.20 mm – Exterior diam: 47.8 mm – Central hole diam: 18.30 mm
|
| (Code: 70514-J) Joints replacement kit for decanter filter (ref : 70514-01) made with aluminum. Composed with an exterior big joint (60 mm x 50 mm x 3 mm) and an exterior small joint (25 mm x 20 mm x 3 mm) – Weight: 2g – Two joints kit
|
| (Code: 70514-JINF) Central joint for decanter filter 28 mm x 20 mm x 3 mm
|
|
(Code: 70514-JSUP) Glass joint for decanter filter 60 mm x 50 mm x 3 mm
|
| (Code: 70514-VP) Aluminum jar for decanter filter (ref 70514-01 ou 70514-02) Diam 62 mm
|
| (Code: 70558) Filter paper for decanter Height: 4.2 cm Diameter: 41 cm Hole inside: 2 cm
|
|
(Code: 70580) Manometer from 0 to 1 bar to control the pressure adjustment. Weight: 61 gr
|
| (Code: 70587) Stainless sieve replacement filter. Highness: 41 mm - Diam: 41 mm - Drilling diam: 20 mm
|
| (Code: 70641) Replace gaskets kit for glass decanter filter. Made up of a large joint exterior 58 mm x interior 48 mm x height 3 mm and a little joint exterior 28 mm x interior 20 mm x height 3 mm. Weight: 2 grams 2 joints kit
|
|
(Code: 70686) Manometer – 0 – 1 bar – 2nd scale PSI G1/8B. Black plastic box, 1/8 pressure type input arranged on the back of the device. Delivered with a 6 mm tip. Weight: 75 gr.
|
| | |
