(Code: 74518) Positioned between the two half hub made with forged carbon, this golden anodized aluminum spacer avoids crashing the hub while clamping the propeller. Weight; 135.5 g. Be careful: precise the device and the model of the aircraft while ordering.
|
| (Code: 74362-02) Carbon (device) for IVOPROP propeller (thread)
|
| |
(Code: 74362-03) 90° pawl for Ivoprop propeller - Exterior diam: 11 mm - Interior diam: 8 mm
|
| (Code: 74561) DUC propeller hub have been realized with CARBONE FORGE process. Half the hub have been studied to mechanical resistance in comparison with identical geometric pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance with a huge gain of weight (divided by 2) Weight: 921g
|
| (Code: 74560) DUC propeller hub have been realized with CARBONE FORGE process. Half the hub have been studied to mechanical resistance in comparison with identical geometric pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance with a huge gain of weight (divided by 2) Weight: 920g
|
|
(Code: 74508-G) Left blade
|
| | (Code: 74511-G) Left blade - DUC Hélice
|
|
(Code: 74524) The DUC propellers hubs are realized with the CARBONE FORGE process. Half the hubs have been mechanically studied to resist, and compared with parts whose geometry is the same but forged with different aluminum alloy. Results have proved an equivalent resistance and a considerable gain of weight (divided by 2). Weight: 210g – 100 CV. Be careful: precise the device and the model of the aircraft while ordering.
|
| (Code: 74517) The DUC propeller hubs are realized with the CARBONE FORGE process. Half the hubs have been tested to mechanical resistance, comparing it to identic geometry pieces realized with different forged aluminum alloy. Results have shown an equivalent resistance and a considerable gain of weight (divided by 2). Weight: 110g
|
| (Code: 74519-100) Screwing kit to fixate the DUC propeller on a propeller shaft. Clamping couple: 2.5 kg/m 25Nm. Kit weight: 210g. Be careful: precise the device and the model of the aircraft while ordering.
|
|
(Code: 74519-120) Screwing kit to fixate the DUC propeller on a propeller shaft. Clamping couple: 2.5 kg/m 25Nm. Kit weight: 210g. Be careful: precise the device and the model of the aircraft while ordering.
|
| (Code: 74525-01) Used if tiny impacts or shrapnel’s are present on blades. Can be used to maintain the propeller.
|
| |
| | |
